HMCS TORONTO leaves Halifax Shipyard graving dock

As of Friday morning, HMCS TORONTO was still in the Halifax Shipyard graving dock undergoing her FELEX refit. 

TORONTO in the graving dock just prior to being floated out.

As of Tuesday morning, I noticed that she had left the graving dock and had been moved to the machine shop wharf as part of the next stage of the refit. 

TORONTO at the machine shop wharf.

As can be told by the amount of staging surrounding the superstructure, she has a ways to go before the refit is complete. TORONTO is the last ship on the east coast in the FELEX refit process. The previous ship, VILLE DE QUEBEC, appears to have just begun sea trials after the completion of her own refit. In February 2015, TORONTO was still alongside in the Dockyard, beginning the disassembly process prior to entering the shipyard. 

These refits are modernizing the weapons and sensor systems of the RCN's HALIFAX class frigates.

HMCS TORONTO tour: Auxiliary Machinery Tour

My previous post on touring HMCS TORONTO covered the propulsion machinery spaces in both the forward and aft engine rooms. Forward and aft of these spaces are the AMRs, or Auxiliary Machinery Rooms. The primary inhabitants of these two rooms are four 850 kW Deutz MWM diesel generators that provide electrical power to the ship. 

It was an interesting opportunity to be able to photograph these two spaces, as the aft AMR was largely intact, while the forward AMR was in the process of being torn apart in preparation for being handed over to the Halifax Shipyard for refit.

Diesel generators intact inside their enclosures in the aft AMR. The enclosure is covered in access ports that can be opened to allow maintenance access all around each generator. The enclosure contains much of the sound produced by the generators, and is also useful in the event of fire.

Looking along the catwalk between the two generators. 

A memorial in the aft AMR for former crewmember who has "crossed the bar".

While the aft AMR was mostly intact, the forward AMR was in the process of being dismantled prior to refit.

In the forward AMR, the diesel engine inside the enclosure is exposed. 

Warships interiors are cramped, with every available space taken up by some piece of equipment - even the spaces below the deck plates. The bilge in the ship is often a treasure trove of lost tools that are lost by the ship's company during routine maintenance tasks, and they can't be retrieved until the ship is next stripped down prior to refit. As I recall, one of my tour guides was looking forward to retrieving a flashlight lost just weeks earlier.

The power generated in the two AMRs is routed to the rest of the ship to power everything from weapons systems, combat and navigation sensors, and the ship's hotel load (lights, etc) via two main electrical switchgear sets. 

Aft main switchgear.

The two AMRs don't just contain power generation equipment, but also have an assortment of other equipment as well. 

The AMRs also contain other equipment, such as R2D2 here (otherwise known as a fuel centrifuge for removing water and contaminants from the ship's fuel supply).

Another auxiliary machinery space, one deck below the weather deck and to the aft of the ship, is the "tiller flat" where the steering motors are found.

The steering gear is mounted on the rudder post. It is powered by two hydraulic motors, with the starboard steering motor seen to the left through the door.

The port hydraulic steering motor.

HMCS TORONTO tour - Propulsion Machinery

HMCS TORONTO in January 2015, returning from her last deployment prior to her mid-life refit.

As the last HALIFAX class frigate to enter the midlife FELEX refit program on the East Coast, TORONTO was the last ship of the class here in Halifax remaining more or less in her original configuration. She was therefore my last opportunity to photograph the interior of this class of ship for posterity prior to some fairly major changes.

The propulsion plant of the HALIFAX class represents somewhat of a departure from earlier RCN surface warships. The three earlier classes (Tribal, St. Laurent family, & IROQUOIS) were fitted with two pairs of steam or gas turbines, for cruise and boost power (though in the case of the ST. LAURENT class, they were designed with cruise turbines that were either later removed or not fitted at all to later ships of the class). The HALIFAX class, while retaining two gas turbines for high speed, uses a single diesel engine for fuel efficient operation at cruising speeds. They also have a unique gearbox arrangement to allow a CODOG (Combined Diesel or Gas) arrangement. I believe these ships were the first RCN warships to use diesel propulsion since a batch of BANGOR class minesweepers commissioned during the Second World War.

Also unlike previous ships, the cruise and boost powerplants are installed in separate compartments. The propulsion diesel is situated in the aft engine room, and the gas turbines are fitted in the forward (and larger) engine room along with three gearboxes. 

While I was doing my tour, the diesel propulsion engine was actually being dismantled piece by piece and removed through a hole in the deck. 

Looking down into the aft engine room.

Looking down into the aft engine room, but from one deck lower.

A series of "soft patches" in the various decks above the engine room can be removed to allow the removal of engine components. We were there just in time to see one of the turbo-chargers being lifted out. In contrast, I believe the gas turbines can actually be removed more or less in one piece, up through the funnel - thought it requires disassembly of the enclosures and trunking. This has allowed gas turbines to be replaced in foreign ports during the extended deployment of some ships.

Turbo-charger being removed by FMF Cape Scott personnel. A turbine on the exhaust stream powers a compressor that increases the amount of combustion air in the diesel's 20 cylinders, allowing the engine to produce more power.

As I recall, SEMT-Pielstick (recently rebranded as MAN Diesel) designed the 20-cylinder, 8,800 shp, propulsion diesel specifically for this class of ship - I don't know if it has been used anywhere else. This led to some teething issues early in the life of the class. The engine is normally hidden inside an enclosure, but during my visit the enclosure was opened up and the engine partly torn down. (Clarification: the engine block itself was not removed, but the engine was stripped down prior to the refit.)

Partly torn down Pielstick diesel inside its enclosure. To the left of the photo is the forward bulkhead.

The yellow-and-black port propeller shaft runs aft in the aft engine room. I had wanted a good picture of the "El Diablo" artwork seen here in the background, but unfortunately the enclosure panel it was on was the one removed to access the diesel, and was partly obscured. It appears in a Combat Camera video taken during one of TORONTO's extended deployments just prior to her refit.

The diesel's drive shaft leaves the engine and heads to the forward engine room, where it intersects with the centreline of the ship's Royal Schelde cross connect gearbox. The cross connect gearbox allows the single diesel to drive both propellers.

Sketch showing my understanding of the ship's propulsion layout. (P) = Port, (S) = Starboard, PD = Propulsion Diesel, PGT = Propulsion Gas Turbine, Prop = Propeller, GB = Gearbox, CCGB = Cross Connect Gearbox, ER = Engine Room. The dashed line represents a bulkhead.

Looking forward in the forward engine room. The Royal Schelde cross-connect gearbox is in the immediate foreground, while the port and starboard gearboxes and gas turbines are partly hidden behind piping.

In the forward engine room, there are two General Electric LM2500 gas turbines that provide 47,500 shp to take the ship up to 30+ knots. They are installed side by side immediately forward of their port and starboard gearboxes. Aft of the port and starboard gearboxes is the Royal Schelde cross-connect gearbox, from which the propeller shafts exit. The gearbox setup is intended to allow the following configurations:

• diesel engine driving either or both shafts
• port gas turbine driving either or both shafts
• starboard gas turbine driving either or both shafts
• both gas turbines driving both shafts simultaneously.

In a CODOG powerplant, propulsion diesel and gas turbines can not power the propellers at the same time.

Port gearbox looking forward.

Starboard gearbox looking forward, with the back end of the gas turbine enclosure visible.

In the event of engine or gearbox failure, considerable redundancy is provided. Some examples:

• If the diesel engine fails, either or both gas turbines can be used for propulsion. 
• If either gas turbine fails, either the diesel or the remaining gas turbine can provide propulsion.
• If the cross connect gearbox fails, the gas turbines can be used through the port and starboard gearboxes (although they are dedicated to a single propeller shaft). 
• If either or both port and starboard gearboxes fail, the diesel engine can still work through the cross-connect gearbox, or a remaining gas turbine can work through its gearbox.
• If either propeller or shaft experiences problems, power can be routed to the remaining shaft.

I'm sure there are additional failure modes here that I have not considered. Machinery in previous classes of warships were designed to operate with partial submersion of the engine room, so these ships may also be so designed (although the diesel and gas turbines of modern warships may or may not be more susceptible to submersion than the steam turbines of previous warships). The engines are all shock mounted which also reduces sound transmission.

Looking forward, the starboard propeller shaft leaving the cross-connect gearbox.

Port propeller shaft leaving the cross-connect gearbox. When the ship pulls into port, and stops her engines, the ship's company holds a 50/50 lottery on which number each shaft will stop on, with part of the proceeds going to charity.

Port propeller shaft looking aft.

The GE LM2500 gas turbines belong to one of the most widely-used families of marine gas turbines. I once heard an RCN commander comment in the mid-2000s that he was surprised that GE got the contract, where such things normally go to the lowest bidder, and the LM2500's had been so reliable to that time. They are installed inside enclosures that provide sound and fire isolation, to prevent detection by sonar and provide a measure of containment in the event of fire. There are fire suppression systems inside each enclosure.

Looking aft between the two gas turbine enclosures. The two doors visible access the interior of the enclosures.

Looking through a window in the enclosure at the compressor stages of the starboard LM2500 gas turbine.

As with the IROQUOIS class that I have written about earlier, the cruise and main engines can be controlled locally (via the local control panel in the aft end of the forward engine room), from the machinery control room (MCR), or from the bridge. 

Looking to starboard along the catwalk at the aft end of the forward engine room, with the local control panel to the right.

Head-on photo of the local control panel.

The local control panel in the forward engine room is part of the Integrated Machinery Control System (IMCS). This panel can control and monitor many pieces of equipment, from the three engines and three gearboxes, as well as the hydraulics for the controllable pitch propellers. If you look at the top of the panel, you can see the schematic outlines of the two gas turbines, with the various gearboxes outlines below.

As with the previous IROQUOIS class, the HALIFAX class has two controllable pitch (CP) propellers. The propeller blades can be controlled to provide different degrees of forward or reverse thrust. The engines, and in particular the gas turbines, generally have speeds at which they are more efficient than others. The propellers allow the engines to be kept within their most efficient operating parameters, by controlling the propeller pitch rather than the engine speed. The CP props are also useful in transitioning to reverse thrust - gas turbines only spin in one direction.

Although many systems are being replaced as part of the mid-life FELEX refit, the engines and gearboxes shown here will continue to propel these ships into the third decade of this century.